RELEASE and ERASABLE
UV Eraseable Coatings
ERV-6511 UV curable eraseable coating for offset and litho printing formulated for use on
PVC and other plastics.
ERV-11174 is a UV curable eraseable screen coating designed for use on PVC, plastics and boards.
ERV-5551 is a UV curable eraseable flexographic coating formulated for use on PVC and other plastics.
UV Release Coatings
RCV-5201 UV curable release coating is a 100% solids (0% VOC) flexographic varnish formulated to provide release from pressure sensitive backed tapes and labels.
RCV-3901 UV curable release coating is a 100% solids (0% VOC) flexographic
varnish formulated to provide release for pressure sensitive backed tapes and labels.
RCV-241 can be used on paper and most plastics, when using on paper, best results
will be seen on clay coated SBS board, semi-gloss or glossy label stock. More porous
substrates may require heavier coat weights (i.e. 6 bcm), otherwise a primer may be
needed for more porous stock. A glossy, continuous film of the RCV-241 is
necessary in order to achieve proper release. Failure to provide a glossy,
continuous film will result in the scratch off coating “locking up” on the
substrate. When using on plastics, best results will be seen when using corona
treated substrates, or surfaces with 38 dynes or greater.
PTV-993 is a 100% reactive UV curable flexographic/gravure coating designed for use on PVC, PET and treated plastics as well as paper. PTV-993 provides a glossy finish with excellent abrasion, chemical and block resistance. PTV-993 can withstand prolonged steel wool abrasion with virtually no effect on the coating surface.
Solvent Based Breakaway Coating For Films
RCS-9891 is a solvent based release coating formulated for flexographic or grauvure application on PET and other plastic films.
Water Based Coatings
RCW-7431 is an FDA approved water based release coating formulated for use with low peel pressure sensitive adhesives.
RCW-7431 is approved for use under FDA regulations 21 CFR 175.300, 176.170 and 176.180.